Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 354 / 420

’04 HIGHLANDER_U (L/O 0308)

354

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Carpets
Use a good foam

−

type shampoo to

clean the carpets.

Begin by vacuuming thoroughly to remove

as much dirt as possible. Several types of
foam cleaners are available; some are in

aerosol cans and others are powders or

liquids which you mix with water to pro-
duce a foam. To shampoo the carpets,

use a sponge or brush to apply the foam.

Rub in overlapping circles.
Do not apply water—the best results are

obtained by keeping the carpet as dry as

possible. Read the shampoo instructions
and follow them closely.

Seat belts
The seat belts may be cleaned with

mild soap and water or with lukewarm
water.

Use a cloth or sponge. As you are clean-

ing, check the belts for excessive wear,
fraying, or cuts.

NOTICE

Do not use dye or bleach on the
belts

—

it may weaken them.

Do not use the belts until they be-

come dry.

Windows
The windows may be cleaned with any

household window cleaner.

NOTICE

When cleaning the inside of the rear
window, be careful not to scratch or

damage the heater wires or connec-

tors.

Air conditioning control panel, car au-
dio, instrument panel, console panel,

and switches
Use a soft damp cloth for cleaning.

Soak a clean soft cloth in water or luke-

warm water then lightly wipe off dirt.

NOTICE

Do not use organic substances (sol-
vents, kerosene, alcohol, gasoline,

etc.) or alkaline or acidic solutions.

These chemicals can cause discol-
oring, staining or peeling of the

surface.

If you use cleaners or polishing
agents, make sure their ingredients

do not include the substances men-

tioned above.

If you use a liquid car freshener, do
not apply the liquid onto the ve-

hicle’s interior surfaces. It may con-

tain the ingredients mentioned
above. Immediately clean any spill

using the method mentioned above.

Leather Interior
The leather upholstery may be cleaned

with neutral detergent for wool.

Remove dirt using a soft cloth dampened

with 5% solution of neutral detergent for

wool. Then thoroughly wipe off all traces
of detergent with a clean damp cloth.
After cleaning or whenever any part of the
leather gets wet, dry with a soft clean

cloth. Allow the leather to dry in a venti-

lated shaded area.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды