Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 150

Страница: 150 / 420

’04 HIGHLANDER_U (L/O 0308)

126

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Low fuel level

warning light

The gauge indicates the approximate

quantity of the fuel remaining in the
tank when the ignition switch is on.

Nearly full—Needle at “F”
Nearly empty—Needle at “E”
It is a good idea to keep the tank over

1/4 full.
The needle moves when braking, acceler-

ating or making turns. This is caused by
the movement of the fuel in the tank.
If the fuel level approaches “E” or the low

fuel level warning light comes on, fill the
fuel tank as soon as possible.

On inclines or curves, due to the move-

ment of fuel in the tank, the fuel gauge

needle may fluctuate or the low fuel level
warning light may come on earlier than

usual.
If the fuel tank is completely empty, the
malfunction indicator lamp comes on. Fill

the fuel tank immediately.
The indicator lamp goes off after driving

several times. If the indicator lamp does

not go off, contact your Toyota dealer as
soon as possible.

The gauge indicates the engine coolant

temperature when the ignition switch is
on. The engine operating temperature

will vary with changes in weather and

engine load.

If the needle moves into the red zone,

your engine is too hot. If your vehicle
overheats, stop your vehicle and allow the

engine to cool.
Your vehicle may overheat during severe
operating conditions, such as:

Driving up a long hill on a hot day.

Reducing speed or stopping after high

speed driving.

Idling for a long period with the air

conditioning on in stop

−

and

−

go traffic.

Fuel gauge

Engine coolant temperature

gauge

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды