Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 97 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

The SRS (Supplemental Restraint Sys-

tem) side airbags and curtain shield air-
bags are designed to provide further

protection for the driver, front passen-

ger and second outside passengers in
addition to the primary safety protec-

tion provided by the seat belts.

In response to a severe side impact, the

SRS side airbags and curtain shield air-

bags work with the seat belts to help
reduce injury by inflating. The SRS side

airbags help reduce injuries mainly to the

driver’s or front passenger’s chest and the
SRS curtain shield airbags help reduce

injuries mainly to the driver’s, front pas-

senger’s or second outside passenger’s
head.
The SRS side airbag on the passenger

seat will not activate if there is no pas-

senger sitting in the front passenger seat.

However, the side airbag on the passen-

ger seat may deploy if luggage is put in

the seat, or the seat belt is buckled up

regardless of the presence of the occu-

pant in the seat. (As for the front passen-

ger occupant classification system, see

“—Front passenger occupant classification

system” on page 81 in this Section.)
The SRS curtain shield airbag on the pas-

senger side are activated even with no

passenger in the front seat or second out-
side seat.
The SRS curtain shield airbags may acti-
vate even when the side airbags are not

activated.
Always wear your seat belt properly.

Your vehicle is equipped with a crash

sensing and diagnostic module, which will

record the use of the seat belt restraint
system by the driver and front passenger

when the SRS side airbags and curtain

shield airbags are inflated.

CAUTION

The SRS side airbag and curtain
shield airbag system is designed

only as a supplement to the prima-

ry protection of the driver, and
front passenger and second outside

passenger seat belt systems. To en-

sure maximum protection in an ac-
cident, the driver and all passen-

gers in the vehicle must wear their

seat belts properly. Wearing a seat
belt properly during an accident re-

duces the chances of death or seri-

ous injury or being thrown out of
the vehicle. For instructions and

precautions concerning the seat

belt system, see “Seat belts” on
page 54 in this Section.

—SRS side airbags and curtain

shield airbags

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды