Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 74

Страница: 74 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

3. Pull the seatback angle adjusting le-

ver up to unlock and push down the
seatback.

When returning the seatback to the up-
right position, be careful not to make

yourself hit by the seatback which will

bound with considerable spring force.
After returning the seat to its original

position, be certain to replace the head

restraint.

CAUTION

Do not allow passengers to ride on
the flattened seat while driving; use

the seat in the normal position.

After returning the seat to its origi-
nal position, try pushing the seat

and seatback forward and rearward

to make sure it is secured in place.
Be certain to replace head restraint.

To flatten the seatbacks, do the follow-

ing:

1. Hold the center of the lever and pull

it up, sliding the second seat to the
rear

−

most position. Then pull the

seat forward slightly until it locks.

Flattening seatbacks

(power seat)

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды