Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 112 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

(A) INFANT SEAT INSTALLATION
An infant seat must be used in rear

−

facing position only.

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”

indicator light is illuminated. In the
event of an accident, the impact of

the rapid inflation of the front pas-

senger airbag could cause death or
serious injury to the child if the

rear

−

facing child restraint system is

installed on the front passenger
seat.

Do not install a child restraint sys-
tem on the second (or third) seat if

it interferes with the lock mecha-

nism of the front (or second) seats.
Otherwise, the child or front (or

second) seat occupant(s) may be

killed or seriously injured in case
of sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe
installation, install the child re-

straint system on the right second

seat.

—Installation with seat belt

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды