Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 108 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

CAUTION

To avoid potential death or serious

injury when the front passenger occu-

pant classification system does not

detect the conditions correctly, ob-

serve the following.

Do not recline the front passenger

seat seatback so that it interferes

with a second seat as it may cause

the “AIRBAG OFF” indicator light

be illuminated. If the seatback inter-

feres with the second seat, return

the seatback to a position where it

does not interfere with the second

seat.
Avoid reclining the front passenger

seat seatback too much while the

vehicle is moving, as it lessens the

effectiveness of the seat belt.

Make sure the “AIRBAG ON” indica-

tor light is illuminated when using

the seat belt extender for the front

passenger seat. If the “AIRBAG

OFF” indicator light is illuminated,

disconnect the extender tongue

from the seat belt buckle, then re-

connect the seat belt. Reconnect

the seat belt extender after making

sure the “AIRBAG ON” indicator

light is illuminated. If you use the

seat belt extender while the “AIR-

BAG OFF” indicator light is illumi-

nated, the front passenger airbag

and side airbag on the front pas-

senger side may not activate cor-

rectly, which could cause death or

serious injury in the event of colli-

sion.

If an adult sits in the front

passenger seat, the “AIRBAG ON”

indicator light should be illumi-

nated. If the “AIRBAG OFF”

indicator light is illuminated, ask

the passenger to sit up straight,

well back in the seat, feet on the

floor, and with the seat belt worn

correctly. If the “AIRBAG OFF”

indicator light still remains illumi-

nated, either ask the passenger to

move to the rear seat, or if that is

not possible, move the front

passenger seat fully rearward.

Wear the seat belt properly.

Make sure the front passenger’s

seat belt tab has not been left in-

serted into the buckle before some-

one sits in the front passenger

seat.

Do not put a heavy load in the

front passenger seatback pocket or

attach a seatback table to the front
passenger seat seatback.

Do not let a rear passenger lift the

front passenger seat with their feet

or press on the seatback with their

legs.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды