Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 378 / 420

’04 HIGHLANDER_U (L/O 0308)

378

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Keep your tire inflation pressures

at the proper level.

The recommended cold tire inflation

pressures, tire sizes and the com-

bined weight of occupants and cargo

(vehicle capacity weight) are de-

scribed on page 398 and 402. They

are also on the tire and loading infor-

mation label.
You should check the tire inflation

pressure every two weeks, or at least

once a month. And do not forget the

spare!

The following instructions for

checking tire inflation pressure

should be observed:

The pressure should be

checked only when the tires are

cold.

If your vehicle has been

parked for at least 3 hours and has

not been driven for more than 1.5

km or 1 mile since, you will get

an accurate cold tire inflation pres-

sure reading.

Always use a tire pressure

gauge.

The appearance of a tire

can be misleading. Besides, tire

inflation pressures that are even

just a few pounds off can degrade

ride and handling.

Do not bleed or reduce tire

inflation pressure after driving.

It is normal for the tire inflation

pressure to be higher after driving.

Never exceed the vehicle capac-

ity weight.

The passenger and

luggage weight should be located

so that the vehicle is balanced.

Tire pressure gauge

INSPECTION AND ADJUSTMENT

PROCEDURE

1. Remove the tire valve cap.
2. Press the tip of the tire pressure

gauge to the tire valve.

3. Read the pressure using a gradua-

tion of the gauge.

4. In case that the tire inflation pres-

sure is not within the prescribed

range, insert the compressed air

from the valve. In case of applying

too much air, press the center of

the valve and release the air to ad-

just.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды