Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 288 / 420

’04 HIGHLANDER_U (L/O 0308)

288

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Keep the back door closed while
driving. An open or unsealed back

door may cause exhaust gases to

be drawn into the vehicle.

To allow proper operation of your

vehicle’s ventilation system, keep

the inlet grilles in front of the wind-
shield clear of snow, leaves, or oth-

er obstructions.

If you smell exhaust fumes in the

vehicle, drive with the windows

open and the back door closed.
Have the cause immediately located

and corrected.

FUNCTIONS OF ENGINE OIL

Engine oil has the primary functions of

lubricating and cooling the inside of the
engine, and plays a major role in main-

taining the engine in proper working order.

ENGINE OIL CONSUMPTION
It is normal that an engine should con-

sume some engine oil during normal
engine operation. The causes of oil

consumption in a normal engine are as

follows.

Oil is used to lubricate pistons, piston

rings and cylinders. A thin film of oil
is left on the cylinder wall when a pis-

ton moves downwards in the cylinder.

High negative pressure generated when
the vehicle is decelerating sucks some

of this oil into the combustion chamber.

This oil as well as some part of the oil
film left on the cylinder wall is burned

by the high temperature combustion

gases during the combustion process.

Oil is also used to lubricate the stems

of the intake valves. Some of this oil
is sucked into the combustion chamber

together with the intake air and is

burned along with the fuel. High tem-
perature exhaust gases also burn the

oil used to lubricate the exhaust valve

stems.

The amount of engine oil consumed de-

pends on the viscosity of the oil, the

quality of the oil and the conditions the
vehicle is driven under.

More oil is consumed by high

−

speed driv-

ing and frequent acceleration and decel-
eration.
A new engine consumes more oil, since
its pistons, piston rings and cylinder walls

have not become conditioned.

Oil consumption:

Max. 1.0 L per 1000

km (1.1 qt./600 miles, 0.9 lmp. qt./600

miles)

When judging the amount of oil con-

sumption, note that the oil may become

diluted and make it difficult to judge
the true level accurately.

As an example, if a vehicle is used for
repeated short trips, and consumes a nor-

mal amount of oil, the dipstick may not

show any drop in the oil level at all, even
after 1000 km (600 miles) or more. This

is because the oil is gradually becoming

diluted with fuel or moisture, making it
appear that the oil level has not changed.
The diluting ingredients evaporate out

when the vehicle is then driven at high
speeds, as on an expressway, making it

appear that oil is excessively consumed

after driving at high speeds.

Facts about engine oil

consumption

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды