Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 381 / 420

’04 HIGHLANDER_U (L/O 0308)

381

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

REPLACING YOUR TIRES
When replacing a tire, use a tire of

the same size and construction,

and the same or greater maximum

load as the originally installed

tires. Also, on four

−

wheel drive

models, all the tires must be the

same brand and have the same

tread patterns.

Using any other size or type of tire

may seriously affect handling, ride,

speedometer/odometer calibration,

ground clearance, and clearance be-

tween the body and tires or snow

chains.
Check that the maximum load of the

replaced tire is greater than 1/2 of the

Gross Axle Weight Ratings (GAWR)

of either the front axle or the rear

axle, whichever greater. As for the

maximum load of the tire, see the load

limit at maximum cold tire inflation

pressure mentioned on the sidewall

of the tire, and as for the Gross Axle

Weight Ratings (GAWR), see the Cer-

tification Label.

For details about the side wall of the

tire and the Certification Label, see

pages 293 and 296.

CAUTION

Observe the following instruc-

tions. Otherwise, an accident

may occur resulting in death or

serious injuries.

Do not mix radial, bias belted,

or bias

−

ply tires on your ve-

hicle, as this may cause dan-

gerous handling characteris-

tics resulting in loss of control.

Do not use tires other than the

manufacturer’s recommended

size, as this may cause danger-

ous handling characteristics

resulting in loss of control.

Four

−

wheel drive models:

Do not use tires of different

brands, sizes, construction or

tread patterns, as this may

cause dangerous handling

characteristics resulting in

loss of control.

Toyota recommends all four tires,

or at least both of the front or rear

tires be replaced at a time as a set.

See “If you have a flat tire” on page

329 in Section 4 for tire change proce-

dure.

When a tire is replaced, the wheel

should always be balanced.

An unbalanced wheel may affect ve-

hicle handling and tire life. Wheels

can get out of balance with regular

use and should therefore be balanced

occasionally.

When replacing a tubeless tire, the

air valve should also be replaced

with a new one.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды