Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 113

Страница: 113 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Same angle

Same position

When installing a child restraint
system in the second seat center

position, adjust both seat cushions

to the same position and align both
seatbacks at the same angle. Other-

wise, the child restraint system can-

not be securely restrained and this
may cause death or serious injuries

in a collision.

1. Run the lap and shoulder belt through

or around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the belt. Keep
the lap portion of the belt tight.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact your Toyota dealer immedi-
ately. Do not install the child

restraint system on the seat until

the seat belt is fixed.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды