Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 319 / 420

Finish

’04 HIGHLANDER_U (L/O 0308)

319

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Remember that when making a turn,

the trailer wheels will be closer than

the vehicle wheels to the inside of the
turn. Therefore, compensate for this by

making a larger than normal turning

radius with your vehicle.

Crosswinds and rough roads will ad-

versely affect handling of your vehicle

and trailer, causing sway. Pay attention
to the rear from time to time to pre-

pare yourself for being passed by large

trucks or buses, which may cause your
vehicle and trailer to sway. If swaying

happens, firmly grip the steering wheel

and reduce speed immediately but
gradually. Never increase speed. Steer

straight ahead. If you make no extreme

correction with the steering or brakes,
the vehicle and trailer will stabilize.

Be careful when passing other ve-
hicles. Passing requires considerable

distance. After passing a vehicle, do

not forget the length of your trailer and
be sure you have plenty of room be-

fore changing lanes.

In order to maintain engine braking effi-

ciency, do not use overdrive.

Because of the added load of the trail-

er, your vehicle’s engine may overheat

on hot days (at temperatures over
30

C [85

F]) when going up a long or

steep grade with a trailer. If the engine

coolant temperature gauge indicates
overheating, immediately turn off the air

conditioning (if in use), pull off the road

and stop in a safe spot. Refer to “If
your vehicle overheats” on page 328 in

Section 4.

Always place wheel blocks under both
the vehicle and trailer wheels when

parking. Apply the parking brake firmly.

Put the transmission in “P”. Avoid park-
ing on a slope with a trailer, but if it

cannot be avoided, do so only after

performing the following:

1. Apply the brakes and hold.
2. Have someone place wheel blocks un-

der both the vehicle and trailer wheels.

3. When the wheel blocks are in place,

release your brakes slowly until the

blocks absorb the load.

4. Apply the parking brake firmly.
5. Shift into “P” and turn off the engine.

When restarting out after parking on a

slope:

1. With the transmission in “P” position,

start the engine. Be sure to keep the

brake pedal depressed.

2. Shift into gear.
3. Release the parking brake and brake

pedal and slowly pull or back away
from the wheel blocks. Stop and apply

your brakes.

4. Have someone retrieve the blocks.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды