Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 158 / 420

’04 HIGHLANDER_U (L/O 0308)

134

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

CAUTION

Be especially careful to prevent erro-
neous pedal operation.

Emissions Inspection and Maintenance

(I/M) programs

Your vehicle may not pass a state

emission inspection if the malfunction
indicator lamp remains on. Contact your

Toyota dealer to check your vehicle’s

emission control system and OBD
(On

−

Board Diagnostics) system before

taking your vehicle for the inspection.
For details, see “Emissions Inspection and
Maintenance (I/M) programs” on page 362

in Section 6.

(g) Low Fuel Level Warning Light

This light comes on when the fuel level
in the tank becomes nearly empty. Fill up

the tank as soon as possible.
On inclines or curves, due to the move-
ment of fuel in the tank, the low fuel level

warning light may come on earlier than

usual.

(h) “ABS” Warning Light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system and the brake assist

system work properly, the light turns off

after a few seconds. Thereafter, if the
system malfunctions, the light comes on

again.
When the “ABS” warning light is on (and

the brake system warning light is off), the

anti

−

lock brake system, the brake assist

system, the traction control system and

the vehicle stability control system do not

operate, but the brake system still oper-
ates conventionally.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during
a sudden braking or braking on slippery

road surfaces.

If either of the following conditions

occurs, this indicates a malfunction

somewhere in the components moni-
tored by the warning light system. Con-

tact your Toyota dealer as soon as

possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle at a safe place and contact your
Toyota dealer.
In this case, not only the anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды