Toyota 2004 HIGHLANDER Скачать руководство пользователя страница 82

Страница: 82 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

To release the belt, press the buckle

release button and allow the belt to
retract.

If the belt does not retract smoothly, pull
it out and check for kinks or twists. Then

make sure it remains untwisted as it re-

tracts.

THIRD SEAT SEAT BELTS

The third seat seat belts are 3

−

point type

restraint with 2 buckles. Both seat belt

buckles must be correctly located and se-
curely latched for proper operation.
Make sure that buckle 1 is securely

latched for ready use of the third seat
seat belt.

Two buckles and tabs for third seat

seat belt

The two tabs have different shape for its

end so that the belt is not buckled in the
wrong place.

Buckle 1—Properly matches with con-
cave end tab
Buckle 2—Properly matches with round

end tab

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды