Toyota 2004 HIGHLANDER Скачать руководство пользователя

Страница: 73 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

CAUTION

When returning the seatback to the
upright position, observe the follow-

ing precautions in order to prevent

personal injury in a collision or sud-
den stop:

Make sure the seatback is securely

locked by pushing forward and rear-
ward on the top of the seatback.

Failure to do so will prevent the

seat belt from operating properly.

Make sure the seat belts are not

twisted or caught under the seat
and are arranged in their proper

position and are ready to use.

To flatten the seatbacks, do the follow-

ing:

1. Hold the center of the lever and pull

it up, sliding the second seat to the
rear

−

most position. Then pull the

seat forward slightly until it locks.

2. Remove the head restraint. Hold the

center of the lever and pull it up.
Then slide the front seat further for-

ward than the front

−

most lock posi-

tion.

Flattening seatbacks

(manual seat)

Содержание 2004 HIGHLANDER





































































































































































































































































































































































































































Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2004 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2004 HIGHLANDER

Отзывы:

Похожие инструкции для 2004 HIGHLANDER

Бренды по названию

Популярные бренды