background image

3.Printer-specific Adjustments

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

3-117

3.13.5

To Convert Colors with Specified Source ICC Profiles (Not Using 
Embedded ICC Profiles)

Explanation

When a user’s RGB images or CMYK images have embedded ICC profiles, the user can ignore the 
embedded ICC profiles and apply a different ICC profile previously specified by the user, so that he or 
she can obtain print images whose quality is equivalent to that of Fiery images.

Procedures

Both the service technician and the user can perform all settings.

 

(1) Create the desired printer profile using the ICC profile creation software.

 

(2) Access TopAccess and open the “Administration” tab menu. Then upload the desired RGB source 

profile, CMYK source profile and printer profile.
Follow (a) to (g) below to upload the profiles.

(a) Access TopAccess and open the “Administration” tab menu.
(b) Open the “Setup” menu and the “ICC Profile” submenu.

PS

XPS

PS

XPS

 

Содержание e-STUDIO2010AC





















































































































































































































































































































































Отзывы: