Tonghui Electronics TH7105, Руководство по эксплуатации

Страница: 152 / 187

147
6.4.3.32
Address 32 (Voltage Mode)
1) Command Description
This command is used to query the voltage output mode of the current step in the programmed mode.
2) Send Instruction Format
3) Return Instruction Format
Data Byte returns 0 or 1.0 means the voltage output mode is AUTO in the current programming mode; 1
means the voltage output mode is HIGH in the current programmed mode.
6.4.3.33
Address 33 (Current High Limit)
1) Command Description
This command is used to query the current high limit of the current step in the programmed mode.
2) Send Instruction Format
3) Return Instruction Format
When the set voltage is not greater than 150V, the return command data range is 0.000~8.400A; when
the set voltage is greater than 150V, the return command data range is 0.000~4.200A. When this
parameter returns to 0.000, it means that this function is off.
1~32 0x03 0x04
0.0~300.0, 4 bytes
stored in float point
type
Calculated based on the first 7 bytes
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x03 0x00 0x20 0x00 0x01
Calculated based on the first 6
bytes
Instrument
address
Function
Code
Number of
Data
Data Byte1 Data Byte2 CRC Low CRC High
1~32 0x03 0x02 0x00
0x00
Calculated based on the first 5
bytes
0x01
Instrument
address
Function
Code
High Address Low Address High bytes Low bytes CRC Low CRC High
1~32 0x03 0x00 0x21 0x00 0x02
Calculated based on the first 6
bytes