46
Save
1)
Move the
key to the serial number of the empty file, then press the save button.
2)
A character selection panel will pop up in the center of the screen, move the cursor to your desired place
with
,
,
,
keys or the knob, then press ADD CHAR soft key to add characters to the file name in the
prompt bar at the bottom of the screen. If you enter the wrong character, press the BACK SPACE soft key. If
you do not need to save the file at this time, press EXIT button.
3)
After the file name is entered, press ENTER or OK to save the file. If the entered file name is the same as
the previous file name, a prompt will appear in the prompt bar at the bottom of the screen. If a user did not
enter a file name, and pressed ENTER or OK, the default file name is UNNAMExx.STA (Note: xx represents
the current file serial number).
Load
1) Press
button to move the cursor to the file number to be loaded.
2) Press the Load key to load the file where the cursor is located.
Copy to I:
1) Press
button to move the cursor to the file number to be copied.
2) Press the Copy to I: soft key to copy the file where the cursor is located to the internal FLASH
Delete
1) Press
button to move the cursor to the file number to be deleted.
2) Press the DEL. key to delete the file where the cursor is located.
Содержание TH7105
Страница 14: ...9...
