7
Figure 2-3 display description
1)
Main menu zone
This area indicates the name of the current page
2)
Parameters setup zone
This area is used to modify the test parameters
3)
Status zone
This area is used to display various prompt information and various status information during system testing.
4)
Measurement result display zone
This area shows the parameter results of the test. The parameter display 1 indicates the output voltage value,
the parameter display 2 indicates the output current value, the parameter display 3 indicates the output power
value, and the parameter display 4 indicates the peak current value.
5)
Soft key zone
This area is used to display the function menu corresponding to the cursor area.
2.4
Basic Operation
2.4.1
Manual mode
1)
Set the output mode: Press the SETUP button, then press the MANU SETUP function button.
2)
Set the voltage output mode: Make use of the direction key to move the cursor to the V mode, and then use
the soft key to select AUTO or HIGH voltage.
3)
Set the output voltage: Press the direction key
or
to move the cursor to VOLT setting, and set the
output voltage by the numeric keys and ENTER key.
4)
Set the output frequency: Press the direction key
or
to move the cursor to FREQ setting, and set the
Содержание TH7105
Страница 14: ...9...
