Tonghui Electronics TH7105, Руководство по эксплуатации

Страница: 181 / 187

176
ON PHS
:FUNC:SANG:PROG <value>
Set the staring angle of the current step in the programmed
mode
:FUNC:SANG:PROG?
Query the staring angel of the current step in the
programmed mode
OFF PHS
:FUNC:EANG:PROG <value>
Set the end angle of the current step in the programmed
mode
:FUNC:EANG:PROG?
Query the end angel of the current step in the programmed
mode
Test
Results
:FUNC:RESULT:PROG 0
Set the result display mode of the current step in the
programmed mode to LAST
:FUNC:RESULT:PROG 1
Set the result display mode of the current step in the
programmed mode to ALL
:FUNC:RESULT:PROG 2
Set the result display mode of the current step in the
programmed mode to P/F
:FUNC:RESULT:PROG?
Query the result display mode of the current step in the
programmed mode. Return 0 or 1 or 2 or 3
Surge
Drop
:FUNC:SD:PROG 0
Turn off the surge drop at the current step of the memory
sequence in the programmed mode
:FUNC:SD:PROG 1
Turn on the surge drop at the current step of the memory
sequence in the programmed mode
:FUNC:SD:PROG?
Query the state of surge drop at the current step of the
memory sequence in the programmed mode. Return 0 or 1
Over
Current
Fold
:FUNC:OCF:PROG 0
Turn off the over current fold function at the current step of
the memory sequence in the programmed mode
:FUNC:OCF:PROG 1
Turn on the over current fold function at the current step of
the memory sequence in the programmed mode
:FUNC:OCF:PROG?
Query the over current fold state at the current step of the
memory sequence in the programmed mode. Return 0 or 1
Loop Cycle
:FUNC:LC <value>
Set the loop cycle at the current step of the memory
sequence in the programmed mode
:FUNC:LC?
Query the loop cycle at the current step of the memory
sequence in the programmed mode
Single Step
:FUNC:SS 0
Turn off the single step test function at the current step of the
memory sequence in the programmed mode
:FUNC:SS 1
Turn on the single step test function at the current step of the
memory sequence in the programmed mode
:FUNC:SS?
Query the state of single test step at the current step of the
memory sequence in the programmed mode. Return 0 or 1
Table 9-2 FUNC Commands