8
output frequency by the numeric keys and ENTER key.
5)
Test output: Press the DISP button, then press the ON/OFF button to output.
2.4.1
Programmable Mode
1) Set the output mode: press the SETUP key, then press the PROG SETUP function key
2) Set the sequence setting parameters: Press the direction key
or
to move the cursor to set the
parameters such as set voltage, voltage mode, frequency, step connection, delay time, dwell time and so on.
3) Setting steps: Press the arrow keys
or
to move the cursor to the parameter step. Use the numeric keys
and the ENTER key to set the step number, then follow step 2) to set the parameters under the step number.
4) Repeat steps 2) and 3) to set the required steps.
5) Test output: Press the DISP button, then press the ON/OFF button to output.
2.5
Boot Instructions
Press the power switch in the lower left corner of the front panel of the instrument to turn the instrument on
and display the boot screen. Figure 2-4 shows the boot screen of the TH7100 series programmable AC power
supply. The boot screen includes some product information such as the trademark, instrument model and
software version number of Tonghui Company.
Figure 2-4 Start Up Screen
If the user has turned on the password protection function, then the instrument will request to enter the
power-on password. Enter the power-on password according to the screen display. This series of products is
not set with the power-on password when leaving the factory, users can reset the power-on password
according to their needs during use. For details, see Password on the <System Settings> page.
Содержание TH7105
Страница 14: ...9...
