Thermo Scientific 074114, Руководство оператора

Страница: 46 / 148

Dionex PDA Operator’s Manual
38
Doc. 065378-01 1/12
•
Create and run an equilibration instrument method or program to automate the
process. See
Section 3.3.2 for details about automated control.
•
If you are running Chromeleon, you can use the Smart Startup feature to
automate system startup and equilibration. In Chromeleon 7, you first create
an instrument method from which the Smart Startup settings are derived. In
Chromeleon 6.8, you can use the Smart Startup Wizard to create a Smart
Startup program. Refer to the Chromeleon Help for details.
3.3 Routine Operation
This section provides a brief overview of detector control with Chromeleon 7 or
Chromeleon 6.8. For complete operating instructions, refer to the Chromeleon
Help.
3.3.1 Direct Control
With direct control, you select operating commands and parameters from
the following locations:
•
Chromeleon 7 ePanel Sets or the Command window
–or–
•
Chromeleon 6.8 Control panels or the Commands dialog box
Direct control commands are executed as soon as they are entered. Most
routine direct control functions can be performed from ePanels or from
Control panels.
For other functions, you can use the Command window or Commands
dialog box. These provide access to all of the available commands and
properties for the Dionex PDA, as well as commands for other devices in
the instrument or timebase, respectively.
To issue direct control commands to the Dionex PDA:
1. Open the ePanel Set (see Section 3.1.2 ) or panel tabset (see
Section 3.1.3 ) and click the tab for the detector.
2. Use the controls (buttons, sliders, etc.) on the panel to issue
commands.