Thermo Scientific 074114, Руководство оператора

Страница: 25 / 148

2 • Description
Doc. 065378-01 1/12
17
Standard Flow Cell
The standard flow cell assembly (see Figure 2-5 ) is available in PEEK
and 316 stainless steel. Two built-in heat exchangers—one on the cell
inlet tubing and one on the cell handle—help stabilize the temperature of
the mobile phase before it enters the cell.
The standard cell is designed for applications with 3- to 4-mm ID
separator columns and flow rates of 0.5 to 5.0 mL/min.
Do not use a PEEK flow cell with normal phase or chlorinated
solvents; these solvents will damage the cell.
Do not use a stainless steel flow cell with low pH solutions; these
solutions may cause corrosion, contamination, and metal leaching.
Figure 2-5. Standard Flow Cell Assembly
Standard Cell Component PEEK Cell SST Cell
Inlet tubing: 0.38-mm (0.015-in) ID P/N 057304 N/A
Outlet tubing: 0.38-mm (0.015-in) ID P/N 057304 N/A
Inlet tubing: 0.25-mm (0.010-in) ID N/A P/N 056124
Outlet tubing: 0.25-mm (0.010-in) ID N/A P/N 051650
Reducing union fitting P/N 055903 P/N 055902
Reducing Union Fitting
Reducing Union Fitting
Cell Outlet Tubing
Cell Inlet Tubing
Heat Exchangers
Flow Cell
Handle
Spring Clip