Thermo Scientific 074114, Руководство оператора

Страница: 42 / 148

Dionex PDA Operator’s Manual
34
Doc. 065378-01 1/12
3.1.2 Connect to the Chromeleon 7 Client
1. Start the Instrument Controller Service, if it is not already running. If
the Chromeleon tray icon on the taskbar is crossed out in red ,
the Instrument Controller Service is not running. To start it, right-
click the icon and select
Start Chromeleon Instrument Controller .
The icon changes to gold to indicate that the Instrument
Controller Service is starting. When the Instrument Controller
Service is running (idle), the icon changes to gray
.
If the Chromeleon tray icon is not on the taskbar, click Start > All
Programs > Chromeleon 7 > Services Manager to open the
Services Manager and click Start Instrument Controller .
2. Start the Chromeleon 7 client:
a. Click Start on the Windows taskbar and select All Programs >
Chromeleon 7 >Chromeleon 7 .
b. Click the Instruments Category Bar on the Console.
c. On the Navigation Pane, click the instrument that includes the
detector. The ePanel Set for the instrument appears in the Console
Work Area.
d. To display the detector ePanel, click the UV_Vis tab on the
ePanel Set (see Figure 3-1 ).
e. Verify that the Connected check box is selected. If it is not, click
the box to connect the Dionex PDA to Chromeleon 7.
NOTE After starting Chromeleon 7 and connecting to
the ePanel, the
Connected
LED on the
detector’s status bar is blue.