background image

Sentinel V SC and RT Operation Manual 

September 

2017 

 

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

 

Page 305 

 

  The "Library", below, refers to any such software library or work 
which has been distributed under these terms. A "work based on the 
Library" means either the Library or any derivative work under 
copyright law: that is to say, a work containing the Library or a 
portion of it, either verbatim or with modifications and/or translated 
straightforwardly into another language. (Hereinafter, translation is 
included without limitation in the term "modification".) 
 
  "Source code" for a work means the preferred form of the work for 
making modifications to it. For a library, complete source code means 
all the source code for all modules it contains, plus any associated 
interface definition files, plus the scripts used to control compilation 
and installation of the library. 
 
  Activities other than copying, distribution and modification are not 
covered by this License; they are outside its scope. The act of 
running a program using the Library is not restricted, and output from 
such a program is covered only if its contents constitute a work based 
on the Library (independent of the use of the Library in a tool for 
writing it). Whether that is true depends on what the Library does 
and what the program that uses the Library does. 
 
  1. You may copy and distribute verbatim copies of the Library's 
complete source code as you receive it, in any medium, provided that 
you conspicuously and appropriately publish on each copy an 
appropriate copyright notice and disclaimer of warranty; keep intact 
all the notices that refer to this License and to the absence of any 
warranty; and distribute a copy of this License along with the 
Library. 
 
  You may charge a fee for the physical act of transferring a copy, 
and you may at your option offer warranty protection in exchange for a 
fee. 
 
  2. You may modify your copy or copies of the Library or any portion 
of it, thus forming a work based on the Library, and copy and 
distribute such modifications or work under the terms of Section 1 
above, provided that you also meet all of these conditions: 
 
    a) The modified work must itself be a software library. 
 
    b) You must cause the files modified to carry prominent notices 
    stating that you changed the files and the date of any change. 
 
    c) You must cause the whole of the work to be licensed at no 
    charge to all third parties under the terms of this License. 
 
    d) If a facility in the modified Library refers to a function or a 
    table of data to be supplied by an application program that uses 
    the facility, other than as an argument passed when the facility 
    is invoked, then you must make a good faith effort to ensure that, 
    in the event an application does not supply such function or 
    table, the facility still operates, and performs whatever part of 
    its purpose remains meaningful. 
 
    (For example, a function in a library to compute square roots has 
    a purpose that is entirely well-defined independent of the 
    application. Therefore, Subsection 2d requires that any 
    application-supplied function or table used by this function must 
    be optional: if the application does not supply it, the square 
    root function must still compute square roots.) 
 
These requirements apply to the modified work as a whole. If 
identifiable sections of that work are not derived from the Library, 
and can be reasonably considered independent and separate works in 
themselves, then this License, and its terms, do not apply to those 
sections when you distribute them as separate works. But when you 
distribute the same sections as part of a whole which is a work based 
on the Library, the distribution of the whole must be on the terms of 
this License, whose permissions for other licensees extend to the 
entire whole, and thus to each and every part regardless of who wrote 

Содержание SENTINEL V REAL-TIME
























































































































































































































































































































































Отзывы: