Sentinel V SC and RT Operation Manual
September
2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 97
Tools and Spares Parts
A set of tools and spare parts are included with the system. For replacement kits, see Table 6 and Table 7.
Table 6.
Tools and Spares Parts
Part Number
Description
Where Used
81D-6003-00
O-ring tool
Use the O-Ring tool to remove the 2-163 housing
O-ring.
2-163
2-163 O-ring
The housing O-rings (one each end) prevent the system from
flooding.
5020
Silicone lubricant, 4-pack
Lightly coat the 2-163 O-ring with lubricant before installing the
O-ring on the housing.
DES2
Desiccant bag
Used inside the housing to prevent water condensation.
6958A14
4mm Hex key
Used to attach the end-cap to the housing.
81D-4002-00
Captive Nut
81D-4003-00
M5 Captured bolt with washers
75DK6009-00
Silicone oil fill kit with syringe,
needle, needle cover, and 1 oz. of
silicone oil.
Used to fill the Pressure Sensor with oil.
Note that the sensor is
NOT filled when shipped and must be properly filled with oil
prior to deployment.
3/16BLADE
Screwdriver
Used to remove the Pressure Sensor cover.
M3X0.5X8FHN
Black nylon flat head screw
Used to hold the pressure sensor cover in place
