Sentinel V
Self-Contained
Quick Start Card
Wireless with
D Cell Batteries
95D-6014-00 (September 2017)
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Connecting to the ADCP
Touch Sensor
Connect
Start ReadyV
Sentinel V ADCPs display as SVnnnnn (where
nnnnn is the five or six character serial
number shown on the product label).
Touch the sensor
Click the wireless icon ( ) in the system tray.
Click the Refresh icon ( ).
Locate the ADCP on the list and click on it.
Click
Connect.
Open a browser.
Type
192.168.0.2
in the address bar.
Beep(s) heard.
If the beep is not heard, check that the
battery is installed.
Touching the sensor starts the ADCP’s
WLAN for five minutes.
As needed, touch the Touch Sensor, listen for
the beep, and then click until the ADCP
appears on the list.
It may take several attempts of clicking Refresh
before the ADCP appears on the list.
It can take up to 30 seconds for the
ReadyV Home panel to display.
As needed, touch the Touch Sensor,
listen for the beep, and then refresh
the browser page until ReadyV starts.
Start ReadyV within five minutes of
connecting to the WLAN.
Read the Self-Contained Deployment Guide and the Sentinel V Operation Manual, Chapter 1 Wireless Connection
Common Issues.
