Sentinel V SC and RT Operation Manual
September
2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 13
Figure 4.
Using the ReadyV Wireless Connection
The Touch Sensor is NOT a button! Just place a finger into the cavity to activate the sensor.
After power is applied (long beep), there is a 10 to 15 second delay before the network is
available (short beep). Wait for the short beep before trying to connect.
The ADCP’s WLAN is available after power up for five minutes. Placing a finger over the Touch
Sensor starts the WLAN for another five minutes.
Each time the Touch Sensor is touched, a short beep should be heard.
Only one ADCP at a time may be connected. To switch to another ADCP, first disconnect, and
then connect to the next ADCP.
Once ReadyV starts, if no keys are pressed for five minutes, the ADCP will disconnect. After
waiting five more minutes, the ADCP will power down. Use the Touch Sensor to restart.
After a deployment, systems need to be cleaned thoroughly before the touch sensor will work.
