background image

September 

2017 

Sentinel V SC and RT Operation Manual 

Page 310 

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

 

 

 

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 
    Lesser General Public License for more details. 
 
    You should have received a copy of the GNU Lesser General Public 
    License along with this library; if not, write to the Free Software 
    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA 
 
Also add information on how to contact you by electronic and paper mail. 
 
You should also get your employer (if you work as a programmer) or your 
school, if any, to sign a "copyright disclaimer" for the library, if 
necessary. Here is a sample; alter the names: 
 
  Yoyodyne, Inc., hereby disclaims all copyright interest in the 
  library `Frob' (a library for tweaking knobs) written by James Random Hacker. 
 
  <signature of Ty Coon>, 1 April 1990 
  Ty Coon, President of Vice 
 
That's all there is to it! 

 
 

 

Содержание SENTINEL V REAL-TIME
























































































































































































































































































































































Отзывы: