Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 823 / 834

6H-30 CHARGING SYSTEM
Reassembly [70 A and 80 A types]
1) If end housing bearing is removed, install it.
2) Check end housing bearing turns smoothly.
3) If stator is removed, install stator and tighten stud bolts.
4) If drive end bearing is removed, install it.
5) Check drive end bearing turns smoothly.
Tightening torque
(a) : 8.8 N·m (0.88 kg-m, 6.5 lb-ft)
(b) : 2.6 N·m (0.26 kg-m, 2.0 lb-ft)
6) Place drive end frame on pulley, and then install rotor to drive
end frame.
7) Install rear end frame to drive end frame.
8) Tighten 4 nuts to specified torque.
Tightening torque
(a) : 4.5 N·m (0.45 kg-m, 3.5 lb-ft)
1. End housing bearing
2. Rotor
3. Bearing cover
1. Stud bolt
2. Retaining plate
3. Drive end bearing
4. Stator
1. Rotor
2. Drive end frame
1. Rear end frame
2. Drive end frame