Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 452 / 834

ENGINE MECHANICAL (H25 ENGINE) 6A2-77
7) Check timing mark on crankshaft as shown in figure.
8) Install valve lash adjuster, camshaft, CMP sensor and RH
bank 2nd timing chain.
Refer to “Camshaft and Valve Lash Adjuster” and “RH (No.2)
Bank 2nd Timing Chain and Chain Tensioner” in this section.
For CMP sensor, refer to “CMP Sensor” in Section 6F2 for
installation.
9) Install 1st timing chain.
Refer to “1st Timing Chain and Chain Tensioner” in this sec-
tion for installation.
10) Install LH bank 2nd timing chain.
Refer to “LH (No.1) Bank 2nd Timing Chain and Chain Ten-
sioner” in this section for installation.
11) Install timing chain cover.
Refer to “Timing Chain Cover” in this section for installation.
12) Install oil pan and oil pump strainer.
Refer to “Oil Pan and Oil Pump Strainer” in this section for
installation.
13) Install cylinder head cover.
Refer to “Cylinder Head Cover” in this section for installation.
14) Install exhaust manifold.
Refer to “Exhaust Manifold” in this section for installation.
15) Install radiator outlet pipe, radiator, cooling fan and water
hose.
Refer to “Cooling Water Pipes or Hoses”, “Radiator” and
“Cooling Fan and Fan Clutch” in Section 6B installation.
16) Install throttle body and intake manifold.
Refer to “Throttle Body and Intake Manifold” in this section
for installation.
17) Adjust water pump drive belt tension.
Refer to “Cooling Fan Belt Tension Check and Adjustment” in
Section 6B for adjusting procedure.
18) Adjust power steering pump drive belt tension.
Refer to “Power Steering Drive Belt” in Section 3B1 for
adjusting procedure.
19) Adjust accelerator cable play and A/T throttle cable play.
Refer to “Accelerator Cable Adjustment” and “A/T Throttle
Cable Adjustment” in Section 6E2.
20) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been rein-
stalled.
1. Crank timing pulley key
2. Oil jet