Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 310 / 834

ENGINE MECHANICAL (G16 ENGINE) 6A1-19
INSTALLATION
1) Install tensioner plate to tensioner.
Insert lug (1) of tensioner plate into hole (2) in tensioner.
2) Install tensioner (2) and tensioner plate (3) :
Do not tighten tensioner bolt (1) with wrench yet. Hand
tighten only at this time.
Check to ensure that plate movement in arrow direction as
shown in figure causes tensioner to move in the same direc-
tion.
If no associated movement between plate and tensioner
occurs, remove tensioner and plate again and reinsert plate
lug into tensioner hole.
3) Check that timing mark “E” (2) on camshaft timing belt pulley
is aligned with “V” mark (1) on cylinder head cover. If not,
align two marks by turning camshaft but be careful not to
turn it more than its allowable turning range which is
described on “Caution” under “Timing Belt and Belt Ten-
sioner” in this section.
4) Check that punch mark (2) on crankshaft timing belt pulley is
aligned with arrow mark (1) on oil pump case. If not, align
two marks by turning crankshaft but be careful not to turn it
more than its allowable turning range which is described on
“Caution” under “Timing Belt and Belt Tensioner” in this sec-
tion.