Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 185 / 834

6-1-44 ENGINE GENERAL INFORMATION AND DIAGNOSIS (H25 ENGINE)
E61-23 PPL
Duty output terminal (if
equipped)
0 – 1 V Ignition switch turned ON
Immobilizer indicator lamp
output (if equipped)
10 – 14 V While engine running
0 – 1 V
Ignition switch turned ON with engine
stop
E61-24 PPL/WHT
Serial communication line of
data link connector 5 V (if
equipped)
4 – 6 V Ignition switch turned ON
E61-25 PPL/RED
Serial communication line of
data link connector 12 V (if
equipped)
10 – 14 V Ignition switch turned ON
E61-26 BLU/ORN
Power steering pressure
switch signal
10 – 14 V Ignition switch turned ON
0 – 1 V
With engine running at idle speed, turn-
ing steering wheel to the right or left as
far as it stop
E61-27 – – – –
E61-28 GRN/BLK
A/C request signal (if
equipped)
4 – 6 V
(High input)
Ignition switch turned ON, Blower fan
selector selected OFF position or A/C
switch turned OFF or A/C evaporator
temp. less than 2.5°C, 36.5°F
0 – 1 V
(Low input)
Ignition switch turned ON, Blower fan
selector selected ON position and A/C
switch turned ON with A/C evaporator
temp. more than 4°C, 39.2°F
E61-29 RED/YEL
Electric load signal for clear-
ance lamp
0 – 1 V
Ignition switch turned ON, Clearance
lamp not lighted up
10 – 14 V
Ignition switch turned ON, Clearance
lamp lighted up
E61-30 YEL
Diagnosis switch terminal (if
equipped)
10 – 14 V Ignition switch turned ON
E61-31 GRN/WHT
Electric load signal for stop
lamp
0 – 1 V
Ignition switch turned ON, Stop lamp
not lighted up
10 – 14 V
Ignition switch turned ON, Stop lamp
lighted up
E61-32 GRY/YEL
Ground for CO adjusting resis-
tor (if equipped)
Below 0.3 V Ignition switch turned ON
E61-33 GRY/RED
Output of 5 V power source for
CO adjusting resistor (if
equipped)
4.5 – 5.5 V Ignition switch turned ON
E61-34 PPL/YEL
MIL (Malfunction indicator
lamp) output 0 – 2.5 V
Ignition switch turned ON with engine
stop
3.5 – 4.5 V Engine running
E61-35 WHT
Power source for ECM internal
memory
10 – 14 V
Ignition switch turned ON and turned
OFF
C51-3-1 BLU/YEL Vehicle speed sensor signal
✱
0 – 1 V
↑↓
10 – 14 V
(Repeated
indicator)
Vehicle running.
(Sensor signal is pulse. Pule frequency
varies depending on vehicle speed.
(2590 pulses are generated par 60 km/
h, 37.5 ml/h))
TERMINAL
NUMBER
WIRE
COLOR
CIRCUIT
NORMAL
VOLTAGE
CONDITION