Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 784 / 834

CRANKING SYSTEM (0.9 kW, 1.2 kW and 1.4 kW Reduction Type) 6G-9
12) Remove rear bracket cap, and then remove rear bush, as
required.
Reassembly
1) Inspect component parts (Refer to page 6G-12) and replace
with new ones as necessary.
2) Apply grease (Refer to page 6G-3).
3) Install armature to yoke.
4) Install brushes and brush springs to brush holder.
5) Install brush holder to armature while pushing 4 brushes out-
ward.
6) Install rear bush and then rear bracket cap.
7) Install rear bracket.
8) Tighten brush holder screws.
1. Rear bush
2. Rear bracket cap
3. Rear bracket
CAUTION:
• Washing, adjusting and disassembling of shock
absorber (clutch plate) are not allowed.
• New oilless bearing have been lubricated when they
are supplied as spare parts. DO NOT wash with grease
dissolving solvent nor lubricate them with other lubri-
cant.
1. Brush
2. Brush spring
3. Brush holder
1. Rear bracket
2. Brush holder screws