Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 608 / 834

ENGINE COOLING 6B-17
On-Vehicle Service
Coolant Draining
1) Remove radiator cap.
2) Loosen drain plug (1) on radiator to drain coolant.
3) After draining coolant, be sure to tighten drain plug securely.
4) Fill cooling system. Refer to “Coolant” in this section.
Cooling Water Pipes or Hoses
REMOVAL
For G16 and J20 engines
1) Disconnect negative (–) cable at battery.
2) Drain cooling system.
3) To remove these pipes or hoses, loosen screw on each pipe
or hose clip and pull hose end off.
For H25 engine
1) Disconnect negative (–) cable at battery.
2) Drain cooling system.
3) Remove radiator inlet hose (1), outlet hose (2) and radiator
outlet pipe (3).
4) Remove throttle body and intake manifold.
Refer to “Throttle Body and Intake Manifold” in Section 6A2.
WARNING:
• Check to make sure that engine coolant temperature is
cold before removing any part of cooling system.
• Also be sure to disconnect negative cable from battery
terminal before removing any part.