Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 331 / 834

6A1-40 ENGINE MECHANICAL (G16 ENGINE)
13) After applying sealant to part “A” as shown in figure, install
CMP sensor case to cylinder head and tighten its fixing bolts
to specified torque.
Connect CMP sensor connector.
“A” Sealant : 99000-31110
Tightening torque
CMP sensor case bolt
(a) : 11 N·m (1.1 kg-m, 8.0 lb-ft)
14) Adjust valve clearance referring to “Valve Lash (Clearance)”
in this section.
15) Install cylinder head cover.
16) Install radiator and refill cooling system referring to “Radia-
tor” and “Cooling System Flush and Refill” in Section 6B.
17) Install hood lock (1) to front upper member and adjust lock
position referring to “Hood” in Section 9.
18) Refill A/T fluid referring to “Fluid Change” in Section 7B1.
19) Connect negative cable at battery.
20) Upon completion of installation, verify that there is no coolant
leakage or A/T fluid leakage (for A/T vehicle) at each con-
nection.
21) Confirm that ignition timing is within specification referring to
“Ignition Timing Check” in Section 6F1.
1. O-ring