Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 517 / 834

6A4-28 ENGINE MECHANICAL (J20 ENGINE)
5) Install A/C compressor bracket (2) if equipped.
Tighten bracket bolts to specified torque.
Tightening torque
Compressor bracket bolt (a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
6) Install generator belt idler pulley (1).
Tighten nut to specified torque.
Tightening torque
Generator belt idler pulley nut
(b) : 42 N·m (4.2 kg-m, 30.5 lb-ft)
7) Connect radiator outlet hose (3) to thermostat cap.
8) Install generator belt tensioner (4).
Tighten bolts to specified torque.
Tightening torque
Generator belt tensioner bolt
(a) : 25 N·m (2.5 kg-m, 18.5 lb-ft)
9) Install water pump pulley (3).
10) Install generator belt referring to “Generator belt” in Section
6H.
11) Install cooling fan belt, fan pulley, cooling fan and shroud.
12) Install bypass pipe (1) and water bypass hose No.2 (2).
13) Install cylinder head cover referring to “Cylinder Head Cover”
in this section.
14) Install oil pan and oil pump strainer referring to “Oil Pan and
Oil Pump Strainer” in this section.
15) Adjust cooling fan belt tension referring to “Cooling Fan Belt
Tension Check and Adjustment” in Section 6B.
16) Refill cooling system with coolant, front differential with gear
oil, engine with engine oil and power steering system with
specified fluid.
17) Verify that there is no coolant leakage, oil leakage, power
steering fluid leakage and exhaust gas leakage at each con-
nection.