Suzuki Engine 2002 GRAND VITARA SQ625, Руководство по обслуживанию

Страница: 413 / 834

6A2-38 ENGINE MECHANICAL (H25 ENGINE)
4) Check that knock-pins of intake and exhaust camshafts are
aligned with match marks on cylinder head as shown in fig-
ure.
5) Install LH bank 2nd timing chain by aligning yellow plate (1)
of chain with arrow mark (2) on idler sprocket No.2.
6) Install sprockets to intake and exhaust camshafts by aligning
silver plate (1) of LH bank 2nd timing chain, match marks on
intake sprocket and exhaust sprocket respectively.
7) Install LH bank intake and exhaust camshaft timing sprock-
ets.
To install it, fit a spanner to hexagonal part at the center of
camshaft to hold stationary.
Tightening torque
Camshaft timing sprocket bolt
(b) : 80 N·m (8.0 kg-m, 58.0 lb-ft)
8) With latch (2) of tensioner adjuster No.3 (5) returned and
plunger (1) pushed back into body, insert stopper (pin) (4)
into set hole (3).
After inserting it, check to make sure that plunger will not
come out.
1. Knock pin of LH bank intake camshaft
2. Knock pin of LH bank exhaust camshaft
3. Match mark of intake side
4. Match mark of exhaust side
CAUTION:
Do not turn camshaft more than necessary.
If turned excessively, valve and piston may get damaged.
2. Arrow mark on intake camshaft timing sprocket
3. Arrow mark on exhaust camshaft timing sprocket
4. Sprocket bolt