Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 67 / 298

3-1
Getting Started
3
This chapter contains the following sections:
•
Overview of Configuration Tasks - a list of the tasks required to get you up
and running with the Sun PU2.1 SNA Server as quickly as possible.
•
Starting the SunGMAN - describes how to start the Sun Gateway Manager.
•
Starting the SunGMI - describes how to start the Sun Graphical Manager
Interface.
•
Creating a Configuration - describes how to create a configuration and how
to add a system, a PU2.1 server, a connection, a physical unit (PU), and a
dependent logical unit (LU) to the configuration.
Note – This chapter is intended to get you up and running quickly. It assumes
that you are creating a manager network consisting of a single system. At a
later time, you can add additional manager systems to the manager network
for increased redundancy and reliability; add additional PU2.1 servers to each
system; create LU pools for dependent LUs; set up users and user groups;
configure additional components, such as those related to LU6.2 and
independent LUs; and run client SNA programs on other systems in your
network, using the Sun PU2.1 SNA Server as a gateway to the SNA network.
For more information, refer to the remainder of this manual and to the
appropriate Sun PU2.1 SNA Server Planning and Installation Guide.