Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 274 / 298

F-8 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
F
TRMTYPE=LUTYPE62
SYSIDNT=idname
NETNAME=netname
F.3.1.3 AS/400
When connecting to an AS/400 for local LU definition, verify the following
parameters for the line description, controller description, and device
description:
CRTCLTAPPC
RMTCPNAME=remote-control-point-name
RMTNETID=remote-network-identifier
AUT=authorization-list-name
F.3.2 Partner LU
The partner LU configuration defines LUType 6.2s on remote systems that are
accessible to a locally-defined LUType 6.2. Each remote LUType 6.2 has a name
that is locally known. Use of such locally-known LU names allows network
reconfiguration to be transparent to the LUType 6.2 programmer. The partner
LU can reside on either a host or a peer node. The following sections describe
the differences in defining partner LUs on each of the node types.
F.3.2.1 VTAM
Partner LUs for local dependent LUs must be primary, single-session LUs.
Partner LUs for independent LUs can be either primary or secondary LUs and
support parallel sessions. VTAM defines resources that are viewed as remote
LUs by the Sun PU2.1 SNA Server with the APPC resource definition directive.
The following parameters are of particular interest:
APPC
PARSESS =YES (for independent LUs)
=NO (for dependent LUs)