Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 206 / 298

12-28 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
3. Enter the following information (note that the MIB variable names are in
parentheses):
System (traceSysName)
The name of the target server system.
Server (traceSrvName)
The name of the server.
Resources (traceResList)
The names of the resources (LUs, PUs, and connections) that you want to trace.
Separate each resource name with a comma. Use * to specify all resources.
If you specify an invalid resource name, the trace fails. You must delete the
failed trace (by highlighting the trace and selecting Edit
→
Delete) and then
configure a new trace using a valid resource name. You cannot modify a sever
trace.
Trace Type (traceFlags)
The trace flags you want to activate. Sun recommends that you specify
X’ffffffff’
to indicate all trace flags. If you want to use other values, contact
the Sun Technical Support staff for assistance.
Output File (traceFileName)
The full pathname of the trace file on the target system. You must enter an
output file name.