Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 139 / 298

Configuring for LUType 6.2 9-7
9
Session Init Type
The type of session that the SSCP initiates with this partner LU (Init Only or
Init or Queue). Use Init Only if you do not want the INIT-SELF that is sent to
the SSCP to be queued. Use Init or Queue if the SSCP can queue the INIT-SELF
until the partner LU becomes available.
Note –
This parameter applies only to a local dependent LUType 6.2.
Parallel Sessions Supported?
Indicates whether parallel sessions are supported with the partner LU. Check
the box if parallel sessions are supported. Clear the box if parallel sessions are
not supported.
CNOS Supported?
Indicates whether the local LU supports CNOS exchanges with the partner LU.
This parameter is valid only if parallel sessions are supported.
Session Password
The LU-LU password for session-level verification on session activation. If you
do not specify a password, LU-LU verification is not performed.
Minimum Security
The minimum level of security that the local LU accepts on incoming allocation
requests from the partner LU. The values are described below:
9.3 Configuring the Session Mode
Note – Before you can configure a session mode, you must configure a partner
LU.
Minimum
Security
Description
None No security information is accepted.
Conversation Conversation-level security (consisting of user ID,
password, and optional profile) is accepted.
Already Verified Conversation-level access with the already-
verified indicator is accepted.