Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 51 / 298

Using the Administration Program 2-3
2
To specify a domain name:
1. Enter the following information:
Domain Name
The DNS domain implemented by the Sun PU2.1 SNA Server. Note that if you
enter the IP hostname or address of a system running the server, you may not
connect to the primary server.
Username
The operator user name you want to connect as. The default is your Unix user
ID. If a user record with Operator privileges is defined, this Username must
match the User ID field of the user record. If a user record with Operator
privileges is not defined, any name is valid.
Password
The password to use when connecting. If a password is defined in a user
record, this Password must match the Password field of the user record. If not,
this Password is ignored.
2. Click Connect (or press the Enter key) to initiate the connection to the
server.
Click Cancel to abandon the connection attempt. Note that if you abandon
the connection attempt, the only actions you can perform are connecting to
the domain and exiting from the server.
Click Help to display more information about the dialog box.
After you connect to the domain, the software displays the main window. For
more information about the main window, refer to the next section.
2.2 Using the Main Window
The following figure illustrates the main window.