Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 79 / 298

Getting Started 3-13
3
3.4.7 Saving the New Configuration
▼
To save the new configuration:
1. From the main window, either select File
→
Save to save the configuration
as
config1
or select File
→
Save As to save the configuration with a new
name. The screen displays the Save dialog box.
2. Click Changes should be made immediately and then click Yes in the
confirmation dialog box. The new configuration files are copied to the
PU2.1 server and the required processes are started/restarted on the
system.
3. While the processes are starting, the status of the system and PU2.1 server,
as shown in the configuration window, changes to Pending-Active. After
the processes start, the status changes to Active. The PU and LU entities
contained in the PU2.1 server change to Active when the IBM SNA
network activates them.
Note – The SNA host (VTAM) must activate its connections to the Sun PU2.1
SNA Server. Refer to IBM's NetView Operations manual for activation,
deactivation, and display commands for SNA resources.
4. To stop a process once it has been started, select the system or PU2.1
server from the resource tree and select Control
→
Stop System or Control
→
Stop Server