Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 279 / 298

Host Configurations F-13
F
Sun recommends that you configure the AS/400 Token Ring line to
automatically create controllers (
LIN(TRLAN) AUTOCRTCTL=YES
). In this case,
the APPC controller,
CTL(APPC)
, is created automatically when the PU2.1
server is started and the configuration task is simplified.
If the AS/400 Token Ring line is configured to automatically create controllers,
you must establish values for the following parameters only:
•
The AS/400's remote network identifier (
RMTNETID
), which is the network
name (or
NETID
) field of the network-qualified CP and LU names.
•
The AS/400's default local location name (
LCLLOCNAME
), which corresponds
to the partner LU name. Use the AS/400 display network attributes
(
DSPNETA
) command to determine this value. Make sure that you use the
default local location name value.
•
The AS/400's local adapter address (
ADPTADR
), which corresponds to the
remote MAC address. This value is established when the AS/400 Token
Ring line description is created using the
CRTLINTRN
command.
•
The mode name, which must be common in both configurations. If installed,
the PC Support/400 installation creates the mode description,
QPCSUPP
.
Table F-3 PU2.1 SNA Server AS/400 Configuration Parameters
Sun Resource Resource Parameter AS/400 Object AS/400 Parameter
PU2.1 server CP Name CTL(APPC) Remote network
identifier
Remote control point
LAN
connection Type
LAN Speed
Local MAC Address LIN(TRLAN)
CTL(APPC)
Connection type
Line speed
Remote adapter
address
DLC Remote MAC Address
Role LIN(TRLAN)
CTL(APPC) Local adapter
address
Data link role
Partner LU Network Qual Name CTL(APPC)
LCLLOCNAME Remote network
identifier
Default local location
name
Session mode Mode Name MODE Mode description