Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 194 / 298

12-16 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
12.1.2 Event Log
The Sun PU2.1 SNA Server provides an event log to capture all events
generated by its components.
To display an event log, select Window
→
Event Log from the menu bar. The
software displays the Events window.
12.1.3 Line Trace
The Sun PU2.1 SNA Server provides a logical data scope utility, Sunscope,
that allows you to observe data sent and received on a LAN, SDLC, or QLLC
connection. Use this utility to capture a line trace of problem scenarios for
subsequent diagnosis.
The following sections describe how to configure your system for line tracing,
how to start a line trace, and how to read the output of a line trace.
luSnaRTMCount[1-4] For each boundary, the number of times the SNA
component of a measured response time fell into its
response time range.
luSnaRTMOverFlow The number of times the SNA component of a measured
response time was outside the upper limit of any of the
counters.
luSnaRTMTotalTime The total accumulated time that the network has SNA and
IP components (in milliseconds).
luSnaRTMLastTime The SNA component of the last measured response time.
luIpRTMCount[1-4] For each boundary, the number of times the IP component
of a measured response time fell into its response time
range.
luIpRTMOverFlow The number of times the IP component of a measured
response time was outside the upper limit of any of the
counters.
luIpRTMTotalTime The total accumulated time for the IP component of the
network.
luIpRTMLastTime The IP component of the last measured response time.
Table 12-2 RTM Table MIB Variables (2 of 2)
MIB Variable Description