Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 125 / 298

Configuring Dependent LUs 8-5
8
numbers of individual LUs after they have been created. For more information
on modifying dependent LUs, refer to Section 8.2, “Modifying Dependent
LUs,” on page 8-8.
Number of LUs
The number of LUs you want to add.
For a single LU, use the default value of 1.
For a group of multiple LUs, the value can range from 1 to 254. Check with
your host network administrator to find out how many LUs are available for
your system. The software adds the number of LUs you specify, starting at
Base LOCADDR. If the address of an LU conflicts with an existing LU, the new
LU is not added.
Pool Name
The name of the LU pool you want to put the LU into. The default is PUBLIC
(for LUType 2) or None (for LUType 0, LUType 1, LUType 3, and LUType 6.2).
Note that all dependent LUs in a particular LU pool must be of the same type.
If you have not yet created the LU pool, exit the dialog box, create the LU pool
(refer to Section 8.4, “Creating an LU Pool,” on page 8-9), and then reopen the
dialog box to specify the new LU pool.
Access Control
A list of all defined users and user groups. Only users and user groups defined
in the records in the right-hand box (under Click to Remove) can access the
dependent LU. If the right-hand box is empty, any user can access the
dependent LU.
To add a user or user group to the right-hand box, click the record in the left-
hand box. To remove a user or user group from the right-hand box, click the
record in the right-hand box.
Note that access control is not applicable to LUType 6.2.