Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 127 / 298

Configuring Dependent LUs 8-7
8
Note – The setting of this parameter is overridden by the equivalent setting in
the user record. For more information about setting this parameter in the user
record, refer to Section 10.1.2, “Advanced User Record Configuration,” on
page 10-3.
PU2.1 Keepalive Timer
The time interval (in minutes) at which the Sun PU2.1 SNA Server sends keep-
alive signals to the client. The server continues to send signals at the specified
time interval until the client sends a response back to the server or until the
number of retries specified by the PU2.1 Keepalive Retries parameter is
exhausted.
This parameter is used in conjunction with the PU2.1 Keepalive Retries
parameter to detect failed client applications and/or workstations. Note that
the setting of this parameter is overridden by the equivalent setting in the user
record. For more information about setting this parameter in the user record,
refer to Section 10.1.2, “Advanced User Record Configuration,” on page 10-3.
PU2.1 Keepalive Retries
The number of times the Sun PU2.1 SNA Server continues to send keep-alive
signals to the client if the client does not send a response back to the server. If
the number of retries is exhausted before the client responds, the LU is freed
and becomes available for another client connection.
This parameter is used in conjunction with the PU2.1 Keepalive Timer
parameter to detect failed client applications and/or workstations. Note that
the setting of this parameter is overridden by the equivalent setting in the user
record. For more information about setting this parameter in the user record,
refer to Section 10.1.2, “Advanced User Record Configuration,” on page 10-3.
In-Session Idle Timeout
The idle time-out period for connections between the client and the host
application (in minutes). If no traffic is detected during the specified time
period, the Sun PU2.1 SNA Server releases the client connection and the active
LU session, and the LU becomes available for another client connection.
Note – The setting of this parameter is overridden by the equivalent setting in
the user record. For more information about setting this parameter in the user
record, refer to Section 10.1.2, “Advanced User Record Configuration,” on
page 10-3.