Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 117 / 298

Configuring PUs 7-7
7
Remote CP Name
A name that is used to verify the incoming XID. The format of the Remote CP
Name is netid.netname, where netid is the returned ID of the SNA network and
netname is the name of the server within the SNA network. Each field can
contain up to eight alphanumeric characters (including @, #, and $). Tabs and
spaces are not allowed. The first character cannot be a number. Lowercase
letters are converted to uppercase.
If you do not specify a Remote CP Name, the Remote Terminal ID is used to
verify the incoming XID. If neither the Remote CP Name nor the Remote
Terminal ID is specified, no attempt is made to identify the remote station.
Automatic Connect?
Indicates whether the link station should try to establish a data link
connection. Check the box if you want the link station to establish a data link
connection. Clear the box if you want the link station to wait for the host to
connect.
This parameter applies only to LAN and switched SDLC connections.
Suppress ACTPU?
Indicates whether the ACTPU should be requested during XID exchange.
Check the box if ACTPU should not be requested. Clear the box if ACTPU
should be requested. If any dependent LUs are defined, make sure that ACTPU
is requested (default).
Limited Resource Link?
Indicates whether the PU should be disconnected when no sessions are active.
Check the box if the PU should be disconnected. Clear the box if the PU should
not be disconnected. Since SSCP-LU sessions are always active, this setting is
ignored if dependent LUs are defined.
Max Data
The maximum frame size for this station (excluding the transmission header,
request/response header, and link header), specified in bytes. This parameter
is applicable only for LAN connections. For Token Ring and FDDI, the value
can range from 41 to 4 129. For Ethernet, the value can range from 41 to 1 441.
The value must be less than the Maximum Data Size set for the LAN
connection. For more information, refer to Section 6.1.2, “Advanced LAN
Configuration,” on page 6-3.
Note – The frame size depends on the RU size. For more information, refer to
IBM formats.