Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 180 / 298

12-2 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
12.1.1 Resource Information Tables
The Sun PU2.1 SNA Server allows you to display configuration information,
status information, or Response Time Monitor (RTM) information about
resources. The following sections describes how to select the type of
information to display, how to customize the format of a resource information
table, and how to use the status and RTM tables.
12.1.1.1 Selecting the Type of Information to Display
By default, the software displays a configuration table for each resource. In
addition, for systems, connections, physical units (PUs), dependent logical
units (LUs), and LU pools, the software allows you to display a status table.
For dependent LUs, the software allows you to display an RTM table. Note
that if you are monitoring an operational system, the status table or RTM table
usually contains more information than the configuration table.
▼
To select the type of information to display:
1. Highlight the resource in the resource tree.
2. Click and hold the right mouse button (MB3) and select
Display
→
Configuration, Display
→
Status, or Display
→
RTM from the
popup menu.
The information in the resource table changes to reflect the type of
information you selected.
If the Display command is not available in the popup menu, the table
format has not been created for the highlighted resource. For information on
customizing a table format for the resource, refer to the following section.
12.1.1.2 Customizing a Table Format
▼
To customize the format of a configuration, status, or RTM table:
1. Select Options
→
Table Formats to display the Table Formats dialog box.