Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 268 / 298

F-2 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
F
The NCP/VTAM gen lists all the SNA resources connected to an SNA
communications controller. The LU macro defines the characteristics of the
3270 client attached to the corresponding LU port on the Sun PU2.1 SNA
Server.
The LU type is determined by parameters that are transferred on the SNA bind
message during session establishment.
The following sample configuration shows the LU definitions for three 3270
display clients and one 3287 printer.
**************************************************
*
* LU MACROS
*
**************************************************
BLU01102 LU LOCADDR=2,DLOGMOD=D4A32782
BLU01103 LU LOCADDR=3,DLOGMOD=D4A32782
BLU01104 LU LOCADDR=4,DLOGMOD=D4A32782
PLU01180 LU LOCADDR=X'80',DLOGMOD=DCS2K
In addition, the VTAM log-on mode (
LOGMODE
) tables require entries describing
the operating characteristics of logical units. The association between the LU
and its
LOGMODE
entry is created in the LU macro of the VTAM/NCP gen or in
the definition of a superior resource: group, line, or physical unit (PU).
A
LOGMODE
entry defines session and presentation values that are included in
the session activation request (
BIND
) sent by the SNA host application to the
3270 client. The
LOGMODE
entry values specify the expected screen size, display
formatting characteristics, maximum message sizes, and session protocol
definitions.
The following example is a
LOGMODE
entry suitable for a sun3270 client:
LOG32782 MODEENT LOGMODE=LOG32782,
FMPROF=X'03',
TSPROF=X'03',
PRIPROT=X'B1',
SECPROT=X'90',
COMPROT=X'3080',
RUSIZES=X'85C7',
PSNDPAC=0,